Simple and Affordable Sysytem

Do you want the ABSOLUTE MINIMUM you need to start SAVING FUEL in your car or truck? Here is what you need:

1. The Electrolyzer produces Brown's Gas: Hydrogen & Oxygen for your engine,
   
2. The MAP Sensor Enhancer tunes your computer to maximum fuel economy.
   
   
3. Fuel Additives from the hardware store, not from the autoparts supply store.
   

You will find that these devices are very powerful, but also that each device is simple enough to build in a couple of hours from low-cost hardware. Once you have these "appetizers" in action, and you feel the power of this technology to save fuel in your car or truck, I'm sure you will get the appetite to check out the rest of the technology revealed to you. It will actually be a good idea if you start with this minimum and then grow your Hydrogen-On-Demand system in several easy phases.

In Water4Gas e-books each device is described in its own separate chapter, so it is easy to pick and choose what you need and want. You will find all the knowledge you need to successfully install, operate and fine-tune your Water4Gas system for maximum fuel economy.

1. Electrolyzer

The Water4Gas Electrolyzer (some call it "Hydrogen Generator") is Bill Lang's unique design. It has SPIRAL electrodes rather than plates, thus producing MORE HHO - for LESS energy from the battery. Contained in a quart-size highly durable jar. Looks fragile but it's not! We've never seen any of these jars break or crack, in thousands of miles of day-to-day road tests and I'm still using the same jar from 2006. TOMORROW WE'LL DISCUSS AND DEMONSTRATE THIS PART IN DETAIL.

A "Vaporizer", however, is NOT an Electrolyzer. It does not have the metal electrodes. It's just a jar for water and a bubbler - it adds water vapor to the engine to cool it down, improves combustion and somewhat improve fuel economy (depending on the engine and fuel control system). Also serves as part of the "charged water system" that you will learn about in Water4Gas e-books.

The Vaporizer shown to the right is a technology some 85 years old - we have official US patents from the 1920’s describing this technology as the common knowledge of those days! The device simply adds water vapor to the normal mixture of gasoline and air, and has most of the benefits of its bigger brother, the HHO device.

Some say it has its origins in the fog of WW II, where it is said to have been used on U.S. aircrafts during that war. One story has it that as pilots flew their aircraft close to the surface of the water, they noticed a dramatic increase in the power and performance of their engines. For reasons that remain obscure, this technology has never reached the public.

What we have done is researched today’s technology and SIMPLIFIED the technology using readily available parts and materials, to bring you devices that are both very simple, very affordable and at the same time very POWERFUL. Our development also makes it easy for you to use, maintain and even duplicate our Water4Gas technology if you choose to.

2. Fuel Heater

The Fuel Heater pre-heats your gasoline for better gas economy, using only energy from the radiator that gets wasted otherwise. Absolutely NO modifications done to the radiator or its hoses!

3. Low-Cost Additives

Several formulas are given in my books, mainly based on Xylene (Xylol) (some with optional Acetone). Xylene can be obtained cheaply from hardware stores (paint department) and helps to atomize the fuel so it can be broken easily into smaller particles. This enhances combustion and saves much more money than it costs.

ADDITIONAL ADD-ON DEVICES

A) MAP Sensor Enhancer: this electronic device that reduces fuel consumption without modifying the engine or the computer – an absolute must have for great fuel economy! MORE DETAILS ABOUT THIS DEVICE IN DAY 5 OF THIS COURSE.

B) PCV Enhancer: another great companion to your hydrogen system that improves the PCV (Positive Crankcase Ventilation) function, protects your engine and saves gas.

C) Mechanical and electrical installation hardware:

• Fuse holder + wiring. Connect to the 12 volts.
• Vacuum T-connector: helps you splice the vacuum line for feeding the hydrogen and oxygen into the engine. Not necessary for diesels due to the lack of vacuum.
  
• Two vacuum hoses, 3.5 feet each.
  
• Bungee cords, 8" cable straps (for Electrolyzer), 11" cable straps (for Fuel Heater), flex tubing (to protect the wiring harness). For some systems you'll also need 1/4" vinyl tubing.
• Catalyst: household Baking Soda - totally safe catalyst! "Catalyst" means a substance that helps the electricity separate water into HHO. Distilled water alone does not conduct electricity so nothing would happen without this material. Can be obtained cheaply at your grocery store.
  
  

4. Engine Modifications???

Water4Gas requires no modifications to the engine, computer or fuel injection systems, therefore any backyard mechanic can install it easily.

Click Here For More Information

Yours Sincerely

David Jackson